I also got the most of the rest of the engine compartment wiring done. The only part not complete is the battery wiring. Here is the completed interface wiring.
Next up is getting the rear battery rack installed.
Monday, August 18, 2008
Motor and Controller Installed
I have finally gotten the motor and controller installed in the car. I spent several hours getting them lined up and bolted in only to find that when I test fit the battery rack the motor is too high. I used the original motor mounts but they put the motor about 1/2" too high. I'll fix that later. I did not bolt the axles to the transmission yet in case I need to remove it all. Here are a couple of pictures of the installation.
I also got the most of the rest of the engine compartment wiring done. The only part not complete is the battery wiring. Here is the completed interface wiring.
Next up is getting the rear battery rack installed.
I also got the most of the rest of the engine compartment wiring done. The only part not complete is the battery wiring. Here is the completed interface wiring.
Next up is getting the rear battery rack installed.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment